Dns_probe_finished_nxdomain is a very common error on Windows 7, 8.1 & 10. A lot of users have to face this problem because the DNS lookup failed. A lot of users have reported this error. They have also faced dns_probe_finished_bad_config error. When you try to access any site, sometimes your screen displays the message ‘dns_probe_finished_nxdomain’. This error most likely to occur on google chrome. However this error does not occur on Mozilla Firefox or Internet Explorer.
This error can occur due to various reasons. These reasons relate to DNS server of your computer. Most of the times, this error occurs because the DNS lookup has failed. This error is temporary or you may need some tweaks in internet settings. You just have to reboot your system to fix dns probe finished nxdomain. This error is very easy to fix.
Fix DNS_PROBE_FINISHED_NXDOMAIN Error on Google Chrome
If rebooting your system does not work then there could be error in your VPN connection or anti-virus. You can try to fix it by disabling antivirus. Another solution to fix this error is to flush the DNS server or change it on your system. Here we will tell you about all the possible solutions to fix this error.
The internet connectivity issues are very common these days. If you are fed up with this problem then you can check here how to fix dns_probe_finished_nxdomain. These errors are very basic. When you visit some of the websites & you can get the message ‘this web page is not available dns probe finished nxdomain error’ because the DNS lookup has failed.
How To Fix DNS_PROBE_FINISHED_NXDOMAIN Error
You should check all the settings & options to fix this issue. Sometimes getting this error is very irritating & frustrating. If you are getting this issue for the first time then you can try for some general solutions like wireless router settings, checking the IP address, clearing cookies & caches etc. You can scan your computer or disable third party antivirus. You won’t be able to access the web on different browsers if this issue occurs on your system. You can re-install the router & open it within 5 minutes. You can also reset the router settings.
Method 1: Restart the system
Step 1– Close all the open programs on your system & restart it.
Step 2– Connect to the internet & try using google chrome.
Method 2: Restore google chrome to default settings
Step 1– Open google chrome & type ‘chrome://flags/’ on search bar & then press ‘enter’.
Step 2– A ‘chrome experiment’ section will open.
Step 3– You will see a ‘reset all to default’ state.
Step 4– Click on ‘reset’ & restart the chrome browser.
Method 3: Flush the DNS
Step 1– Open command prompt as admin by pressing ‘windows key + X’.
Step 2– Press ‘enter’ & type the following command ‘netsh winsock reset catalog’
Step 3– After its execution, reboot your system.
Method 4: Change the DNS address
Step 1– Right click on ‘network’ icon & click ‘open network and sharing center’.
Step 2– Click on ‘change adapter settings’.
Step 3– Right click on your active ‘network connection’ & click on ‘properties’.
Step 4– Choose ‘Internet Protocol Version 4 (TCP/IPv4)’ & click ‘properties’.
Step 5– Click on ‘use the following DNS server addresses’ & add the below server addresses. Click ‘ok’.
- Preferred DNS Server: 188.8.131.52
- Alternate DNS Server: 184.108.40.206
Method 5: Restart DNS client
Step 1– Press ‘windows key + R’. Type ‘services.msc’ & press ‘enter’. A service window will open.
Step 2– From Services, search ‘DNS client’ & right click on it.
Step 3– Then click on ‘restart’ to restart the ‘DNS client’.
Step 4– Reboot your computer & then access google chrome & try to open the webpage that was showing the error.
Method 6: Disable any VPN temporarily
Step 1– First, disable the VPN temporarily & then reboot your computer.
Step 2– Open chrome & access that webpage which was displaying the error.
I hope this content helps you to solve the error. It basically occurs due to a faulty internet connection & firewall setting. Before opting for any method, you are advised to check the internet connection as well as the routers. You can use the above mentioned methods for fixing the issue in windows & Mac OS.